AIRMAR TECHNOLOGY CORPORATION,
A world leader in innovative design and manufacturing of Ultrasonic transducers,
is recruiting for a
Airducer Laminator II
Under minimal supervision prepares and assembles laminated assemblies and all lamination/airducer assemblies, foams.
DUTIES AND RESPONSIBILITES:
- Observes all safety regulations including personal protective equipment applicable to the use of electrical tooling and equipment and applicable to handling chemicals (flux, isopropyl alcohol, epoxies, solder, and urethane foam) and propane torches.
- Reads Bill of Materials and Work Instructions to determine what is required for each airducer/lamination. Verifies parts kit to Bill of Materials.
- Organizes daily assignments and performs all job functions of Laminator II as required.
- Pays close attention to detail regarding condition of parts. Notifies supervisor of discrepant material.
- Assists Laminator I and/or Airducer Laminator I in the absence of supervisor.
- Assists in laminator training.
- Assists supervision in tracking airducer/lamination and airducer yields for monitoring of process controls.
- Assists in other assembly areas, as required.
- Maintains clean and orderly work area.
- Completes all necessary paperwork on completed jobs.
- Performs other related duties as may be required or directed.
- Cleans ceramics and solders wires to surfaces as specified
- Laminates using 2 part epoxies, pneumatic presses and holding fixtures
- Tests completed elements as required by BOM
- Applies damping materials to elements and cures per process
- Assembles transducers using hand or pneumatic tools and fixtures
- Applies backfill potting as required by BOM
- Completes final assembly of transducers per BOM including wiring, accessory installation and testing.
- High school education or equivalent experience.
- I year or more as Airducer Laminator I.
- Soldering certificate essential. Able to handle assemblies of up to 20 lbs.
PHYSICAL REQUIREMENTS AND ABILITIES:
- Individuals must possess knowledge, skills and abilities or be able to explain and demonstrate that the individual can perform the primary functions of the job, with or without reasonable accommodation, using some other combination of skills and abilities and to possess the necessary physical requirement, with or without the aid of mechanical devices, to safely perform the primary functions of the job.
- Physical requirement include: the ability to bend downward and forward by bending spine at the waist; bend legs at knee, to come to rest on knee or knees, bend the body downward and forward by bending leg and spine; extend hand(s) and arm(s) in any direction; use upper extremities to press against something with steady force in order to thrust forward, downward, or outward, use upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion; raise objects from a lower to a higher position or move objects horizontally from position to position; to pinch, pick or otherwise primarily work with fingers. Primary functions are performed sitting or standing or a combination of both.
- Visual acuity sufficient for work which deals largely with mechanical assembly and/or visual inspection involving small parts/defects.
- Ability to perform repetitive or routine duties working from detailed instructions and under standard procedures.
- Ability to endure periods of heavy workload. Able to handle assemblies of up to 20 lbs.
If you meet these criteria, please forward your resume to: HumanResources@airmar.com.